Publicité
Daily consumption
This function makes it possible to view
the power the radiator has consumed
over the previous 24 hours.
Weekly consumption
This function makes it possible to view
the power the radiator has consumed
over the previous 7 days.
Displaying the ambient temperature
Alignment of the ambient temperature
This function is used to edit the ambient
temperature measured by the radiator
and used to manage heating power, if it
needs to be corrected to compensate for
reading errors due to things like being
near to heat sources, or cold air
draughts.
6.3.1 Presence sensor
This function allows the radiator to pick up whether or not people are in the space, and automatically regulate the heating
level, in order to optimise comfort and energy saving.
Thanks to this function, which can only be activated in Comfort mode, the radiator continuously monitors the room and, if no
people are detected, it reduces the comfort temperature set as follows:
Period
of absence
60 min
90 min
120 min
38 hours
The reduction is temperature always relates to the comfort temperature. If the radiator is in Eco or Anti -freeze mode, no
change in temperature to be maintained in the room will be observed.
Reduction of the Comfort
temperature
1,0°C
2,0°C
3,5°C
Anti-freeze activated 7±3°C
36
If the consumption indication is flashing,
this means that the data saved relates to
a period of less than 24 hours.
Please note: The display shows the
estimated consumption, which may differ
from that measured by specific meters,
suitable for the purpose.
If the consumption indication is flashing,
this means that the data saved relates to
a period of less than 7 days.
Please note: The display shows the
estimated consumption, which may differ
from that measured by specific meters,
suitable for the purpose.
The
display
shows
temperature measured by the radiator.
The display flashes the correction value
to be applied. To edit it, push the "+" or "-
" keys.
If, for example, the temperature set on
the radiator is 19,2°C and the ambient
temperature is measured at 19,5°C, align
it by +0,3°C.
Always wait at least 4 hours for the
temperature to settle, before doing any
alignment.
Indication
on the display
The presence sensor and comfort mode
symbols flash together
((
the
ambient
))
Publicité
