Hamilton Beach HBRD370 Manuel D'instructions page 35

WARNING
Electrical Shock Hazard
•
Make sure the oven and lights are cool and power to the oven has been
turned off before replacing the light bulb(s).
•
The lenses must be in place when using the oven. The lenses serve to
protect the light bulb from breaking.
•
The lenses are made of glass. Handle carefully to avoid breakage.
•
Failure to do so could result in death, electric shock, cuts or burns.
REPLACING AN OVEN LIGHT
The oven light is a standard 25-watt (G9) appliance bulb.
IMPORTANT: Before replacing the bulb, make sure the
oven is cool and the controls are turned off.
1. Disconnect the power.
2. Remove the bulb cover by
3. Remove the burned-out bulb from the socket.
NOTE: To avoid damage or decreasing the life of the new bulb,
do not touch the bulb with bare fingers. Wear gloves or use a
tissue when replacing the light bulb.
4. Replace the bulb, and then replace the bulb cover.
5. Reconnect the power.
turning it anti-clockwise.
33