Hamilton Beach HBRD370 Manuel D'instructions page 30

CONVECTION CONVERSION
When using Convection Conversion, enter your normal cooking temperature and
time. The convection conversion will adjust the temperature and time for perfect
cooking results.
IMPORTANT:
•
The oven door must be closed before selecting a Convection Conversion oven
mode.
•
Setting Cook Time is required for a Convection Conversion oven mode. If Cook
Time was not set, the control will prompt you to Set Cook Time. See "Cook
Time."
BAKED GOODS
1. Press BAKED GOODS among the Convection Conversion controls.
2. Set the oven temperature.
NOTE: The temperature can be set from 170°F (77°C) to 500°F (260°C).
3. Press START. "Set cooking time" will appear in the display.
4. Press COOK TIME, and then enter the desired cook time by pressing the number
keypad.
NOTE: If a delay start time is desired, Press START TIME, and then press the
number keypad to enter the desired start time. "Press START" will appear the
display.
5. Once START has been pressed, the oven begins to preheat. Once the set
temperature has been reached, a tone will sound.
NOTE: Preheating can cause overcooking. If preheat is required for the recipe,
add 15 minutes to the cook time. Place food in the oven at appropriate time.
6. At the end of the set Cook Time the oven will turn off au omatically, the end of
cycle tone will sound and "Cooking Complete" will appear in the display.
MEATS
It is not necessary to preheat the oven for the Convection Conversion MEATS
mode. Preheating can cause overcooking. If preheat is required for the recipe, add
15 minutes to Cook Time, and place food in the oven at the appropriate time.
1. Place food the in oven and close the oven door.
2. Press MEATS among the Convection Conversion controls.
3. Enter your normal roasting temperature by pressing the number keypad.
NOTE: The temperature can be set from 170°F (77°C) to 500°F (260°C).
4. Press START. "Set cooking time" will appear in the display.
5. Press COOK TIME, and then enter your normal Cook Time by pressing the
number keypad. Press Start.
NOTE: Setting Cook time is required for Convection Conversion oven modes.
6. At the end of the set Cook Time the oven will turn off au omatically, the end of
cycle tone will sound and "Cooking Complete" will appear in the display.
28