Publicité
Les langues disponibles
Les langues disponibles
Package Content
OpenScape Desk Phone CP600
Stand
Handset
Handset cable
Installation and Quick Reference Guide
Notes about Place of Use
• Operation of a SIP telephone is only permitted with indoor LAN ca-
bling. The device shall be connected to the IP infrastructure using
a shielded LAN cable: Cat-5 for 100 Mb/s or Cat-6 for 1000 Mb/s.
The LAN cabling of the building shall ensure that the shield of this
cable is grounded.
• The telephone should be operated in a controlled environment
with an ambient temperature between 5 °C and 40 °C (41 °F and
104 °F).
• Do not install the telephone in a room where large quantities of
dust accumulate; this can considerably reduce the service life of
the telephone.
• Do not expose the telephone to direct sunlight or any other source
of heat, as this is liable to damage the electronic equipment and
the plastic casing.
• Do not operate the telephone in damp environments such as ba-
throoms.
Connect the Handset to the Telephone
See also overview on page 2.
1. Insert the plug on the long end of the handset cable
jack
F
the groove provided.
2. Insert the plug on the short end of the handset cable
jack on the handset
on the base of the telephone and press the cable into
.
into the
into the
13
Publicité
