Télécharger Imprimer la page

Mitel OpenScape CP600 Guide Rapide D'installation Et De Référence page 10

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Important Notes
For safety reasons, the telephone can only be supplied with
7
power as follows:
• with the supplied original power supply unit,
• using a LAN with PoE (Power over Ethernet) which sup-
ports the IEEE 802.3af standard
Never open the telephone. If you encounter any problems,
7
contact your technical support.
Use only original accessories! Using other accessories may
7
be dangerous, and will invalidate the warranty, extended
manufacturer's liability and the CE mark and other certifica-
tions.
Compliance with 2014/53/EU Radio Equipment
Directive (RED):
In accordance with Article 10.8(a) and 10.8(b) of the RED, the follow-
ing table provides information on the frequency bands used and the
maximum RF transmit power of the product for sale in the EU:
CP600
RF Exposure Information (MPE):
This equipment should be installed and operated with minimum dis-
tance 20cm between the radiator and your body.
Note (for USA only)
This device complies with part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including inter-
ference that may cause undesired operation.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and re-
ceiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Changes or modifications made to this equipment not expressly ap-
proved by the party responsible for compliance may void the FCC au-
thorization to operate this equipment.
This product is certified by a Nationally Recognized Testing Laborato-
ry (NRTL). This equipment also complies with Part 68 of the FCC
Rules.
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed
and operated with minimum distance of 20cm between the radiator
and your body. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
10
Frequency bands
Bluetooth 2402-2480 MHz
Power (EIRP limit)
Max. 20 dBm

Publicité

loading