Dreame DreameBot W10 Manuel D'utilisation page 10

Routine Maintenance
EN
Dust Bin
* Clean it as needed
1. Open the robot cover and press the dust bin clip to remove the dust bin.
2. Open the bin cover and empty the bin as shown in the diagram.
Note: The cleaning tool can be used to empty the dust bin.
16
Filter
* Clean it once every 2 weeks (fully dry after cleaning) and change it every 3 months
1. Remove the lter and tap its basket gently.
Note: Do not attempt to clean the lter with a brush, nger, or sharp object.
2. I necessary, rinse the dust bin under the running water and dry them
completely beore re-installing.
Note:
· Rinse the dust bin and lter with clean water only. Do not use any detergent.
· Use the dust bin and lter only when whey are completely dry.
Routine Maintenance
Fresh Tank
* Clean the lter media once every 3 months
1. Open the resh tank cover, move the hose to the side to remove and clean
the lter media as shown in the diagram.
2. Put the lter meida and hose back.
Waste Tank
* Clean after each use
1. Take out the waste tank, open the waste tank cover, and then dump the
wastewater.
2. Clean the waste tank with water and put it back to the base.
Note: The oating ball in the waste tank is a moving part. Do not clean the oating
ball excessively in case o aecting its unctions.
EN
17