Maintenance Of The Maxi-Cosi Mura Tyres; Separating Waste; Product Parts - Maxi-Cosi Mura 3 Mode D'emploi

The fabric cover can be attached in the reverse order.
- Note! The tabs on the bottom should be clicked back
in again. Check that the Comfort cushion is securely
attached to the seat.

6.3 Maintenance of the Maxi-Cosi Mura tyres

- Make sure that the pressure in all the tyres is correct
and the same. The tyres can be infl ated to a maximum
pressure of 26 PSI/1.8 bar. Properly pumped up tyres
will ensure a lighter and more smoother ride from the
Maxi-Cosi Mura and will prevent damage to rotating and
hinging parts.
- The tyres are fi tted with a car tyre valve. They can be
infl ated using the hand pump supplied (to be found in
the front compartment of the basket) or at a garage or
petrol station. The tyres can be infl ated more easily once
the wheels have been removed from the frame.
- A punctured inner tube can be repaired in the same way
as a bicycle tyre. You can buy separate inner tubes from
your supplier.
- Always defl ate the tyres before taking the Maxi-Cosi
Mura onto an aircraft, as the air pressure difference could
cause the tyres to burst.
12
EXI0275_Mura_3_I_BW.indd 12 EXI0275_Mura_3_I_BW.indd 12

7 SEPARATING WASTE

For environmental reasons, we request that you separate the
packaging waste from the Maxi-Cosi Mura. In addition, waste
at the end of the service life of the Maxi-Cosi Mura (product
parts) should be separated.
Warning
Keep plastic wrapping material out of reach of your child in
order to avoid the risk of suffocation.
Packaging
Cardboard box Paper waste
Plastic bag Residual waste

Product parts

Fabric cover Residual waste
Plastic parts In the appropriate container
Metal parts Container for metal
Pneumatic tyres Residual waste
Tether Container for polyester
21-07-09 12:06 21-07-09 12:06