Separating Waste; Maintenance Of The Maxi-Cosi Mura Tyres; Product Parts - Maxi-Cosi Mura Mode D'emploi

EXI0220_Mura_4_I_BW.qxd:-
The fabric cover can be attached in the reverse order.
- Note! The tabs on the bottom should be clicked back
in again. Check that the Comfort cushion is securely
attached to the seat.

6.3 Maintenance of the Maxi-Cosi Mura tyres

- Make sure that the pressure in all the tyres is correct and
the same. The correct tyre pressure is stated on the tyre.
Properly pumped up tyres will ensure a lighter and more
smoother ride from the Maxi-Cosi Mura and will prevent
damage to rotating and hinging parts.
- The tyres are fitted with a car tyre valve. They can be
inflated using the hand pump supplied (to be found in
the front compartment of the basket) or at a garage or
petrol station. The tyres can be inflated more easily once
the wheels have been removed from the frame.
- A punctured inner tube can be repaired in the same way
as a bicycle tyre. You can buy separate inner tubes from
your supplier.
- Always deflate the tyres before taking the Maxi-Cosi
Mura onto an aircraft, as the air pressure difference could
cause the tyres to burst.
12
12-01-2009 10:48 Pagina 12

7 SEPARATING WASTE

For environmental reasons, we request that you separate the
packaging waste from the Maxi-Cosi Mura. In addition, waste
at the end of the service life of the Maxi-Cosi Mura (product
parts) should be separated.
Warning:
Keep plastic wrapping material out of reach of your child in
order to avoid the risk of suffocation.
Packaging
Cardboard box
Plastic bag

Product parts

Fabric cover
Plastic parts
Metal parts
Pneumatic tyres
Tether
Paper waste
Residual waste
Residual waste
In the appropriate container
Container for metal
Residual waste
Container for polyester