Safety First; Description Of Product Parts - Swingline Stack-and-Shred 250X Manuel D'utilisation

Specifications
Sheet Capacity
Manual Feed Slot
Sheet Capacity
Auto-feed Chamber
Duty Cycle
Run Time from Cold
Volts / Hz
Amperage
Motor Watts
Introduction
Thank you for choosing this shredder from Swingline. Please review
these instructions to ensure you are operating the shredder correctly.

Safety First

To guard against injury, the following basic safety precautions must be
observed in the set-up of this product.
• Ensure the machine is plugged into an easily accessible power outlet,
and ensure the cable is not likely to trip up a passer by.
• Any attempt to repair this unit by unqualified personnel will invalidate
the warranty. Please return to supplier.
• Unplug your shredder before moving it or when it is not in use for an
extended period of time.
• Do NOT operate with a damaged power supply cord or plug, after it
malfunctions, or after it has been damaged in any manner.
• Do NOT overload electrical outlets beyond capacity as this can result
in fire or electrical shock. The socket-outlet should be installed near
the equipment and shall be easily accessible.
• Do NOT alter the attachment plug. The plug is configured for the
appropriate electrical supply.
• Do NOT use near water.
• Do NOT use aerosol dusters or cleaners.
• Do NOT spray anything into the shredder.
• Do NOT load the auto-feed chamber with unopened junk mail,
magazines, bound documents etc.
Although this shredder has been designed to comply with UL 60950
safety standards including the "probe accessibility tests", do not operate
the shredder near children or pets.
Safety First
This means you should be careful
because long hair can become
entangled in the cutters.
This means be careful of ties and other
loose clothing which could become
entangled in the cutters.
This means be careful of loose jewelry
which could become entangeld in the
cutters.
Swingline Stack and Shred 250X
8 sheets (80gsm)
250 sheets (80gsm)
12 min ON / 40 min OFF
16 minutes
120V / 60Hz
2.0 Amps
460 Watts
This means don't reach into the feed
opening of the cutters.
This means keep children away from
shredder.
This means no aerosols.
This means no oil lubricant (oil sheets
only).
Use internal credit card position.

Description of product parts

U ON/OFF switch (at rear of machine) A
U Important safety symbols B
(see safety symbols below)
U Jam free indicator C
U Paper loading door handle D
U Paper loading door E
U Door for bin
F
U Continuous jam boost button G
U Auto button
H
U Reverse button
I
U Paper loading door locking mechanism – J
PIN password buttons
U Indicator panel
K
U Casters L
U Manual feed entry slot
M
U Credit card entry slot N
U CD entry slot
O
U CD bin 'in use' location
P
U Paper stack viewing window Q
U Pull out bin with viewing window
R
U CD bin in storage location S
Control Panel and Indicators
Auto
U
C
Jam Free Indicator – This alerts the user when too much
paper is fed into the manual feed slot (see section on Jam Free
Technology).
Paper jam indicator – This means there is a paper jam in the
auto feed chamber.
Bin full/loading door open indicator – This means either:
• Paper loading door is open
• Bin is open
• Bin is full
Power On indicator – This means the machine is turned on.
Cool Down indicator – This means the machine is cooling
down.
Lock – This means the paper loading door is locked (during
shredding).
Paper loading Door Locking Mechanism – PIN Password
1 2
Buttons Enter a four digit code, to lock the loading door during
3 4
shredding.
Continuous
Reverse
Jam Boost
This means do not insert CDs into the
manual feed slot.
Sheet capacity of manual feed slot.
This means the shredder can accept
small staples.
This means the shredder can accept
small paperclips.
3