Connector Panel - Sony VPL-W400Q Mode D'emploi

Connector Panel

1 VIDEO IN connectors
S VIDEO (mini DIN 4-pin): Connects to the S
video output (Y/C video output) of a video
equipment.
VIDEO (BNC-type): Connects to the composite
video output of video equipment.
Note
If you have video equipments connected to both the S
VIDEO and VIDEO connectors, the signal from the S
VIDEO is selected. When showing video connected to
the VIDEO connector, be sure not to connect a cable to
the S VIDEO connector.
2 AUDIO IN L (MONO)/R jacks (phono type)
When you connect the equipment to the VIDEO IN
connectors, connect to the audio output jacks of the
equipment. For stereo equipment, use both the L and R
jacks; for monaural equipment, use the L (MONO)
jack only.
VIDEO IN VIDEO IN AUDIO IN
L (MONO) R R/R-Y/P
S VIDEO VIDEO
1 2
3 INPUT-A connectors (BNC-type)
R/R-Y/P G/Y, B/B-Y/P
R,
Connect to the RGB output of the equipment.
4 AUDIO IN L (MONO)/R jacks (phono type)
When you connect the equipment to the INPUT-A
connectors, connect to the audio output jacks of the
equipment. For stereo equipment, use both the L and
R jacks; for monaural equipment, use the L (MONO)
jack only.
INPUT-A AUDIO IN
G/Y B/B-Y/P C.SYNC L (MONO)
R B
4
3
C. SYNC connectors
B,
R
9
(EN)