On-Screen Messages - Sony VPL-W400Q Mode D'emploi

Notes
• When the LAMP indicator lights up, never open the lamp cover if the projector is installed on the ceiling.
• If the lamp looks damaged when replacing, consult with qualified Sony personnel.
• If the lamp does not light even after replacing it with a new one, consult with qualified Sony personnel.
• If the TEMP indicator starts flashing, consult with qualified Sony personnel.

On-screen messages

Use the list below to check the meaning of the messages displayed on the screen.
Message
NO INPUT
Not applicable!
OPERATING
TEMPERATURE TOO HIGH!
This set will be shut down
after 5 minutes
Please replace the LAMP.
Meaning
No input signal
You have pressed the wrong key.
Operating temperature is too high.
The lamp has reached the end of its life.
Remedy
Check connections
Press the appropriate key.
Turn off the power.
Check to see that nothing is blocking the
ventilation holes.
Replace the lamp.
35
(EN)