Connector Panel - Sony VPL-SC50U Mode D'emploi

Location and Function of Controls

Connector panel

Right side
1 Video/audio input connector
Connect to external video equipment such as a VCR.
S VIDEO (mini DIN 4-pin): Connects to the S video
output (Y/C video output) of a video equipment.
VIDEO (phono type): Connects to the composite
video output of video equipment.
Note
If you connect video equipment to both the S VIDEO
and VIDEO jacks, the signal from the S VIDEO jack
is selected. When projecting the picture via the
VIDEO jack, be sure not to connect a cable to the S
VIDEO jack.
AUDIO input L (MONO)/R jacks (phono type):
Connect to the audio output of equipment. For
stereo equipment, use both the L and R jacks; for
monaural equipment, use the L (MONO) jack
only.
14
(EN)
S VIDEO VIDEO
1
2
INPUT A
2 INPUT-A connector
Connect to external equipment such as a computer.
You can control the mouse signal with the Remote
Commander.
INPUT A (HD D-sub 15-pin, female): Connects to
the monitor output on a computer using the
supplied cable. When inputting a component
signal, use the optional cable.
MOUSE (13-pin): Connects to the mouse port on a
computer to control the mouse function using the
supplied mouse cable.
AUDIO IN (stereo minijack): Connects to the audio
output on a computer to input the audio signal.
3 AUDIO OUT jack (stereo minijack)
Connects to external active speakers.
The volume of the speakers can be controlled by the
VOLUME keys on the Remote Commander or the
control panel.
L-AUDIO-R
3
AUDIO OUT
AUDIO IN
MOUSE