Sony VPL-W400Q Mode D'emploi page 37

AUDIO IN Phono type:
500 mVrms, stereo impedance
more than 47 kilohms
AUDIO OUT (variable out)
Phono type:
max. 1 Vrms, when input is
500 mVrms, stereo impedance less
than 5 kilohms
CONTROL S IN/PLUG IN POWER
Stereo minijack type:
5 Vp-p,
Plug in power, DC 5 V maximum
output 60 mA
CONTROL S OUT
Stereo minijack type:
5 Vp-p
TRIG Minijack type:
POWER ON: DC 5 V,
output impedance 4.7 kilohms
POWER OFF: 0 V
Safety regulations VPL-W400Q: UL1950, CSA950, FCC
Class B, IC Class B
VPL-W400QM: EN60 950(TÜV), CE
General
368 × 176 × 420 mm (14
Dimensions
× 16
Mass Approx. 10 kg (22 lb 1 oz)
Power requirements VPL-W400Q: AC 100-120/
VPL-W400QM: AC 220 to 240
V, 50/60 Hz
Power consumption Max. 350 W (Standby mode:
10W)
Heat dissipation 1194.4 BTU
Operating temperature
0°C to 40°C (32°F to 104°F)
Operating humidity 35% to 85% (no condensation)
Storage temperature –20°C to 60°C (–4°F to 140°F)
Storage humidity 10% to 90%
Supplied Accessories
Remote Commander RM-PJM500
(1)
Size AA (R6) batteries (2)
AC Power cord (1)
Lens cap (1)
BNC (male) ˜Phono (female)
adapter (1)
Operating Instructions (1)
..........................................................................................................................................................................................................
2) 120V operation when using the projector in North America region.
× 7
1
/
2
5
/ inches) (w/h/d)
8
2)
220-240 V, 50/60 Hz
Optional accessories
Projector Lamp PK-PJ500 (for replacement)
Projector Suspension Support PSS-500
Signal Interface cable SIC-10
Projection Lens VPLL-FM100
Carrying Case VLC-500
Some items may not be available in certain areas. For
details, please consult your nearest Sony office.
Pin assignment
S VIDEO connector (4 pin, mini-DIN)
Chrominance
GND
Design and specificatios are subject to change without
notice.
Luminance
GND
37
(EN)