Connector Panel; Remote Commander - Sony VPL-CS4 Mode D'emploi

7 Arrow key (M M M M /m m m m /<
Select the menu or to make various
adjustments.
8 RESET key
Resets the value of an item back to its
factory preset value. This key functions
when the menu or a setting item is
displayed on the screen.

Connector Panel

Left side
1 AUDIO (stereo minijack)
connector
When listening to sound output from the
computer, connect to the audio output of
the computer.
When listening to sound output from the
VCR, connect to the audio output of the
VCR.
2 INPUT A connector (HD D-sub
15-pin, female)
Connect to external equipment such as a
computer.
Connects to the monitor output on a
computer using the supplied cable.
When inputting a component or 15k
RGB signal, use an optional cable.
3 Video input connector
Connect to external video equipment
such as a VCR.
• VIDEO (phono type): Connects to
the composite video output of video
equipment.
< /, , )
< < , ,
S VIDEO VIDEO
INPUT A
AUDIO
• S VIDEO (mini DIN 4-pin):
Connects to the S video output (Y/C
video output) of video equipment.

Remote Commander

The keys that have the same names as those
on the control panel function identically.
1 I / 1 1 1 1 key
2 ENTER/arrow key (M M M M /m m m m /<
Press the center of the key to use
ENTER.
3 MENU key
4 D ZOOM +/– key
Enlarges the image at a desired location
on the screen.
+: Pressing the + key once displays the
icon. This icon indicates the point you
want to enlarge. Use an arrow key (M/
m/</,) to move the icon to the
point to be enlarged. Press the + key
repeatedly until the image is enlarged
to your requirements.
– –
: Pressing the key reduces an image
that has been enlarged with the D
ZOOM + key.
5 Infrared transmitter
6 FREEZE key
Used to freeze the picture projected. To
cancel the freeze function, press the key
again.
Location and Function of Controls
< /, < < , ) , ,
11
GB