FLUX F 414 Mode D'emploi page 17

Three-phase Gearmotor F 414, F 414 Ex
l Repairs to three-phase gearmotors should only be carried
out by suitably qualified personnel.
l Only use three-phase motors with a starter
including an overload cut-out.
l Check direction of rotation of the motor.
(Direction of rotation according to the arrow on the motor )
In case of portable use of three-phase motors :
l Before inserting the electrical plug into the socket,
ensure that the Start/Stop switch is set to "0" ( Stop ).
l Check direction of rotation when switching on the motor.
(Direction of rotation according to the arrow on the motor )
l Observe additional safety instructions which are contained
with the terminal box of the three-phase gearmotor.
Air Motor F 416 Ex, F416-1 Ex, F 416-2 Ex
l Before connecting the air supply hose to the motor,
set the Start/Stop switch to "0" (Stop).
( On model F 416 Ex unlock locking mechanism of the on/off operating trigger)
l Use a silencer or an exhaust air hose.
l Air consumption F 416 Ex, F 416-1 Ex, F 416-2 Ex :
At 3 bar operating pressure ~ 7 l/sec.
At 6 bar operating pressure ~14 l/sec.
.
.
.
17