Safety Instructions - FLUX F 414 Mode D'emploi

Safety Instructions

l Only use the pump for its intended purpose.
l Install the pump in a way which ensures that
it cannot fall into the container.
l
l Never leave the pump unattended.
l Only use the pump with a suitable hose.
l Ensure that the hose is securely fixed to the hosetail.
l Regularly check the motor, pump and hose
to ensure safe operation.
l The pump should not be immersed deeper into the
liquid than the outlet connection.
l Comply with all relevant safety instructions.
Wear appropriate protective clothing.
(Face shield, protective gloves, etc. )
l Comply with the operating instructions of the pump.
l Never operate pump dry.
l The pump should not be exposed to the weather.
l Before removing the motor from the pump:
Completely drain pump, hose and hand tap.
l Clean after each operation.
l Never store the motor in areas in which corrosive
vapours exist.
l Before inserting the electrical plug into the socket
or connecting the air supply hose to the air motor,
ensure that the Start/Stop switch is set to "0" ( Stop ).
l Regularly check the motors according to the relevant
national safety regulations and/or rules for prevention
of accidents. ( In the Federal Republic of Germany these
are for example BGV A2 (VBG 4) ).
12
.