FLUX F 414 Mode D'emploi page 15

For use in hazardous locations
l Only use explosion-proof electric motors which are
approved for category 2 (ZONE 1) or compressed
air motors.
l Observe the EC-Type-Examination Certificate or
the Certificate of Conformity .
l The explosion-proof motor has to be outside the container.
l If the electrical socket or terminal box is positively
located outside the hazardous area, connection to
explosion-proof equipment must not be undertaken.
l For transferrring flammable liquids explosion group
IIA and IIB and temperature class T1 up to T4 only use
pumps which are approved for category 1 (ZONE 0).
l Only clean the power supply cable outside of the
hazardous area.
The installation and operation must comply with the
relevant Health & Safety Regulations. (In the Federal
Republic of Germany these are "TRbF" and also
"BG Chemie" ).
Testing / Repair
l Regularly check motors according to the relevant national
safety regulations and/or rules for prevention of accidents
(In the Federal Republic of Germany these are e.g. BGV A2
(VBG 4)).
l Repairs to explosion-proof motors should only be carried
out by the manufacturer or by an authorized repair depot.
15