Télécharger Imprimer la page

Atag WU90211RM Notice D'utilisation page 130

Masquer les pouces Voir aussi pour WU90211RM:

Publicité

Les langues disponibles

Les langues disponibles

Maintenance
Removing cassette filter
Cleaning
The filters can be cleaned in the dishwasher. Allow the filters to drain well before replacing.
The filters can also be cleaned by hand.
Clean the filters in soapy water with washing up liquid and rinse. Allow the filters to drain well. The
underside of the cooker hood can be cleaned with a mild cleaning agent and a damp cloth. Dry off
with a paper towel.
Replacing cassette filter
The filter should be placed with the locking mechanism on the front. Open the filter access latch.
The notches at the front of the filter will then slot in. Hold the access latch in this position when placing
the filters.
1. Slot the notches at the back of the filter in the specially designed opening of the cooker hood.
2. Tilt the filter upwards.
3. Release the filter access hatch. The notches at the back of the filter will extend outwards and
slot into the specially designed openings of the cooker hood.
The filter is now in position again.
4. Press the edge extraction panel firmly in the magnetic seal again (you will hear a click).
TIP!
The edge extraction panel can be removed for cleaning.
22
1. Switch off the motor and lighting.
2. Pull the edge extraction panel carefully out of the magnetic seal.
Tilt the edge extraction panel downwards.
3. Open the filter's access latch. Support the filter with your hand.
4. Remove the filter from the hood.

Publicité

loading

Ce manuel est également adapté pour:

Wu70211rmBu70ba-adc01Bu90ba-adc01Wu90211rm/a01