Atag WU90211RM Notice D'utilisation page 127

Remote control mode switch on and off
To be able to change function settings remotely, the appliance must be switched on and the
ConnectLife-app must be enabled. Speed level 4 indicator and Wi-Fi indicator will lit static.
Remote control mode is only available if the Wi-Fi connectivity setup has been performed. Touch
the timer key to enable 'Remote control'.
Speed level 4 indicator is blinking: Remote control is enabled.
Speed level 4 indicator lit static: Remote control is disabled.
Wi-Fi menu
To access the Wi-Fi menu the hood must be on standby (the hood and lights must be switched off).
Press the Wi-Fi button for 3 seconds. The Wi-Fi indicator will flash.
Switching on Wi-Fi:
The hood and lights must be switched off.
Press the Wi-Fi button for three seconds. The Wi-Fi indicator will blink 3 times.
Press the Wi-Fi button to turn on Wi-Fi. Speed levels 2 and 3 indicators will blink 3 times. The
Wi-Fi indicator will flash. After 3 seconds it will return to the Wi-Fi menu.
Wi-Fi connectivity
19