Load/Unload Weighing Beams - KERN and SOHN KFA_V20 Mode D'emploi

7.1 Load/unload weighing beams

•
The weighing beams are designed for an evenly spread load
•
Avoid falling load, shock loads and impacts from the side.
•
Weighing beams must not be moved when loaded.
 Place the load onto both weighing beams by using a pallet truck, crane or fork lift.
Ensure that the load is not swinging when it is placed onto the weighing beams.
 Lift the load first vertically at least 10 cm above the weighing beams before it is
removed or newly placed.
10 KFA V20-IA-e-1714