Service, Maintenance, Disposal; Daily Check; Cleaning; Service, Maintenance - KERN and SOHN KFA_V20 Mode D'emploi

8 Service, maintenance, disposal

Before any maintenance, cleaning and repair work disconnect the
appliance from the operating voltage.

8.1 Daily check

 Ensure that all four feet are in contact with the floor.
 Ensure that cables are not damaged.
 Ensure that the weighing beams are free of soiling, in particular underneath the
edges.

8.2 Cleaning

!
Remove regularly corrosive substances.
!
Keep IP protection.
!
Do not aim water or steam jet at the weigh cells.
 Clean weighing beams using a soft cloth soaked in a mild detergent. Take care
that the device is not penetrated by fluids and polish it with a dry soft cloth.

8.3 Service, maintenance

 The appliance may only be opened by trained service technicians who are
authorized by KERN.
 Ensure that the weighing system is regularly calibrated, see chap. 3.5 Testing
instruments control.

8.4 Disposal

 Disposal of packaging and appliance must be carried out by operator according
to valid national or regional law of the location where the appliance is used.
KFA V20-IA-e-1714 11