Publicité
Les langues disponibles
Les langues disponibles
Memory:
With the "MAX/MIN" key you can
view the maximum and minimum
value that has been measured of the
following values
• Indoor temperature
• Indoor humidity
• Outdoor temperature
• Outdoor humidity
1. Press the "MAX/MIN" key.
2. The maximum values are shown
at the respective locations of
temperature and humidity. Next
to the value, "MAX" is displayed.
3. Press the "MAX/MIN" key.
4. The minimum values are shown
at the respective locations of
temperature and humidity. Next
to the value, "MIN" is displayed.
5. Press the "MAX/MIN" key or wait
8 seconds to exit this mode.
Memory reset:
You may delete Maximum and
Minimum values at any time.
1. Press and hold "MAX/MIN" for
2 seconds until a beep can be
heard.
The Maximum and Minimum values
are now erased.
Outdoor temperature alert:
Please view the installation part of
this manual on how to set up this
function.
Activating/Deactivating the alarm:
1. Press the "ALERT" key to
activate the alarm. (
displayed)
2. Press the "ALERT" key to
deactivate the alarm.
(
disappears)
If the alarm is active and the
minimum or maximum value is
passed, an alert signal will sound for
5 seconds.
The outdoor temperature value
shown will blink.
This is repeated every minute until
the outdoor temperature returns to
a value between the minimum and
maximum value set.
Indoor unit:
After the batteries are switched out
in the indoor unit, all memories and
settings will be erased.
Outdoor unit:
After the batteries in the outdoor unit
are replaced, it is required to register
it to the indoor unit again.
Please use the instructions in the
Installation part of this manual.
In case you lost your overview of the
settings or the device shows some
odd behaviour, it is a good option to
reset the indoor and outdoor unit.
1. Remove the batteries from both
2. Wait at least 10 seconds before
3. Follow the registration steps
Within several seconds, the indoor
and outdoor unit should once again
have a radio link and the device
should operate normally.
In case the defect has not been
solved in this manner, you can
contact Commaxx BV.
is
At the end of the lifecycle of this
product, you may not dispose of
it together with normal household
waste. Please recycle it according to
the instruction of your city or area.
Note that used batteries should be
recycled as Chemical waste.
29
BATTERY REPLACEMENT
RESET / SYSTEM ERROR
units
placing back the batteries.
mentioned in the Installation part
of this manual.
ENVIRONMENT
Publicité
