CONTROLS
Weather prediction:
With various icons, a weather
prediction will be displayed for the
day. This prediction is calculated by
changes in the air pressure. Using
this method, it's 75% accurate. Using
air condition or other methods to alter
the indoor climate can impact this
function..
The weather prediction uses the
following icons:
Sunny
Cloudy
Alarm:
Please view the installation part
of this manual on how to set this
function.
Press the "ALARM" key to activate or
deactivate the alarm. When the alarm
activates you can press any key to
stop the alarm. After 24 hours, the
alarm will activate again.
Snooze function:
If the alarm goes off and you use
the snooze function by pressing the
"SNOOZE" key, the alarm will stop
and the
icon will appear on the
display, blinking together with the
icon. After 5 minutes the alarm will go
off again.
Press the "SNOOZE" key to pause
the alarm for another 5 minutes or any
other key to stop the alarm.
Lunar cycle:
The lunar cycle icon shows how
much you can see of the moon this
night (in case of clear skies). This
display is based on the date setting.
Lightly cloudy
Rain
Indoor temperature:
The indoor temperature is measured
every 12 seconds. The temperature
shift icon will indicate if the
temperature has raised, lowered or is
the same.
If the temperature shift is similar
(within 1ºC) over the past hour, it will
show
.
If the temperature shift is raised more
than 1ºC within an hour, it will show
.
If the temperature shift is lowered
more than 1ºC within an hour, it will
show
.
The measuring range is from 0ºC to
+50ºC ±1ºC
Humidity indoor:
The Humidity is measured every 12
seconds. The percentage of humidity
is shown in the display. The comfort
icon will further indicate if the climate
is healthy.
When the humidity is lower than 40%
appears
When the temperature is between
20°C~28°C and the humidity is
between 40%~70%,
There won't be any icon if the
humidity is between 40%~70%,
but the temperature is not between
20°C~28°C.
If the humidity is above 70%,
appears.
28
appears