Publicité
Les langues disponibles
Les langues disponibles
ATTENTION: IN THIS MANUAL,
EN
REFERENCE IS MADE TO
IMAGES WHICH CAN BE FOUND
ON THE LAST PAGES OF THIS
MANUAL. KEEP THIS PAGE
READY WHILE READING THIS
INSTALLATION
Power:
1. Slide the battery cover, found at
the back of the indoor-unit, down
and remove it from the unit..
2. Place 2 batteries, AA-type,
1.5Volt, as indicated in the
battery compartment. (image A)
Batteries are not included.
Once the batteries have been placed,
the indoor-unit will attempt to listen for
the signal of the outdoor unit for three
minutes. As a result, you should perform
steps 4, 5 and 6 within 3 minutes.
3. Remove the outdoor battery
cover by depressing the moon-
shaped clip (image I) and pulling
the two halves of the outdoor unit
apart. (image J).
4. Place 2 batteries, type
AA, 1.5Volt, in the battery
compartment as indicated (image
B)
How to make the outdoor unit re-send
it's signal:
5. Press the "TX" key (image C) to
force the outdoor unit to re-send
it's registration signal.
6. Press the "C/F" key (image D)
to switch between displaying
temperature in ºC or ºF.
Once the indoor and outdoor unit are
registered, the outdoor temperature
and humidity will be displayed on the
screen of the indoor unit.
7. Now place back the battery doors
on the indoor and outdoor units.
8. You can hang the outdoor-unit on
a single screw or put it on a flat
surface.
Time format setting:
You can display the time in a 12-hour
or a 24-hour format. In case you
choose the 12-hour format, it will add
"AM" on the display in the morning
and "PM" in the afternoon. If you
choose the 24-hour format the clock
will run from 0 to 23:59 every day.
•
Press the "UP"-key to switch
between 12 or 24-hour format.
MANUAL.
Time, date and language setting:
Once you have placed the batteries
inside of the indoor-unit, the clock
will display 00:00. Time, date and
language can be set using the
following instructions:
1. Press and hold the "SET" key for
2 seconds. The time display will
start to blink.
2. Press the "UP" or "DOWN" keys
to enter the current hour.
3. Press the "SET" key to continue
to the minute setting.
4. Press the "UP" or "DOWN" keys
to enter the current minute.
5. Press the "SET" key to continue
to the year setting.
6. Press the "UP" or "DOWN" keys
to enter the current year.
7. Press the "SET" key to continue
to the month setting.
8. Press the "UP" or "DOWN" keys
to enter the current month.
9. Press the "SET" key to continue
to the day setting.
10. Press the "UP" or "DOWN" keys
to enter the current day.
11. Press the "SET" key to continue
to the language setting.
The following languages are available
for display of the weekday..
NE - Dutch
ES - Spanish
DA - Danish
GE - German
EN - English
IT
- Italian
FR - French
12. Press the "UP" or "DOWN" keys
to enter the language of choice.
13. Press the "SET" key to exit the
setting mode or wait 8 seconds.
The display will no longer blink after
this and the display will show the date
and time correctly.
•
If no key is pressed for 8
seconds, the setting mode will
end.
•
If you hold the "UP" or "DOWN"
key longer than 2 seconds, the
value will change with 8 steps a
second.
25
Publicité
