1. Pack contents checklist (Fig. I)
1. Filter housing incl. 2 washers
2. Filter cartridge
3. Fitting and operating instructions (with
coloured hardness grade determination
table)
4. Water hardness test strip (stuck to the
fitting and operating instructions, see
Section 8.1)
For reasons of hygiene, the filter cartridge
is packaged in protective foil and not yet
installed in the device.
2. General information
2.1 Explanation of symbols
I
CAUTION!
... points out a potentially dangerous
situation. If it is not avoided, it could result
in personal injury and/or damage.
i
NOTE!
... highlights useful tips and recommen-
dations and information for efficient and
trouble-free operation.
2.2 Introduction
Thank you for purchasing Quick and Clean
from BWT water + more. This innovative
product is designed to save you time and
effort in keeping your bathroom sparkling
clean without the use of harsh or abrasive
chemicals. Please take the time to read this
guide carefully to familiarise yourself with the
units operation and to ensure your product is
installed correctly and safely.
The illustrations in these instructions are provi-
ded as a guide only and may differ from the
actual version of the filter system. They cannot
be used as a basis for legal claims.
Please keep this guide in a safe place for
future reference.
3. Safety information
Always comply with the safety instructions
and act cautiously to ensure safe and
reliable operation.
I
CAUTION!
The BWT Quick & Clean filter system is
intended exclusively for connections to
fittings in the shower or bath.
The filter system is not suitable for the
production of drinking water, i.e. the
filter is not suitable for the treatment of
contaminated water.
Do not operate with hot water
(max. 50 °C).
Keep the spare parts, filling and
packaging material safe from children.
There is a danger of suffocation.
i
NOTE!
An adaptor may be necessary for
mounting to a shower or bath tap
fitting. If necessary, please contact
info@quick-n-clean.com, specifying the
model and make of your fitting.
Only clean the filter system with warm
soapy water. Do not use abrasive and
aggressive cleaning agents.
4. Parts and operating elements
(Fig. II)
1. Washer
2. Nut
3. Button
4. Filter housing
5. Filter cartridge
6. Filter base
7. Connection nut for the shower hose
EN
13