Dogtra E-FENCE 3500 Manuel Du Propriétaire page 6

DESCRIPTION OF RECEIVER/COLLAR PARTS
Collar Strap
Contact Points
Battery Charging
Receptacle
Battery Life Indicator Light
E-FENCE 3500
Receiver/Collar
10
Intensity
Selection Dial
Intensity Selection Dial
Intensity
Selection Dial
Battery Life Indicator Light
place the knob at the Off position, the collar is completely shut off. In order to
maintain full use of the batteries in the collar, please turn off the receiver/collar
when your E-Fence 3500 system is not being utilized.
Receiver Indicator Light (LED)
When first activating the E-Fence 3500, the LED light on the receiver/collar will
illuminate for approximately 1 second to indicate that the power is on. Once the
unit is turned on, a blink will occur every 2 seconds to indicate that the receiver/
collar is functioning properly. The color of the LED indicates the battery life of the
receiver.
(Green = full charge, Amber = medium charge, Red = needs charge)
When the collar does not receive a signal from the transmitter for 10 seconds
or more, the receiver/collar will go into sleep mode, and the LED light will stop
blinking.
When your dog gets close to the E-Fence boundary wire, the indicator light will
blink steadily to indicate that the receiver/collar is being activated.
The stimulation level is adjustable from
each individual dog's receiver/collar so
that it is easy accommodate each dog's
different personality and temperament.
The stimulation levels range from level
1 to level 8, level 1 being the lowest. In
order to select the proper intensity level
for each dog, we recommend that you
begin at level 1 and continue to increase
the level slowly until you are able to
notice a reaction from your dog. This
ensures that you select a level that is
appropriate for your dog. When you
11