Dogtra E-FENCE 3500 Manuel Du Propriétaire page 11

SURFACE Wire (150m/spool)
ha m² Perimeter (m)
0,02ha 200 57
0,04ha 400 80
0,06ha 600 98
0,08ha 800 113
0,1ha 1000 127
0,2ha 2000 180
0,3ha 3000 220
0,4ha 4000 253
0,8ha 8000 358
1ha 10000 400
2ha 20000 566
3ha 30000 693
4ha 40000 800
5ha 50000 895
6ha 60000 980
7ha 70000 1058
8ha 80000 1132
For areas larger than 5 ha, please contact us :
Info.canada@dogtra.com or 1-778-956-7922
20
Flags (50/bundle)
#Spools #Flags #Bundles
1 20 1
1 27 1
1 33 1
1 38 1
1 43 1
2 60 2
2 73 2
2 85 2
3 120 3
3 133 3
4 189 4
5 231 5
6 267 6
6 298 6
7 327 7
8 353 8
8 377 8
ADDITIONAL PARTS
20ga Underground Fence Wire
(150 meters)
The diagrams on p.19 are indicated for a rectangular layout.
Actual flag/wire requirements may vary depending on the layout you've chosen.
You will want to keep a signal field (area where the dog will receive stimulation)
at least 180 - 240 cm on each side of the wire.
In addition, your dog will keep 60 - 120 cm away from the signal field, so an
overall signal field of 240 -360 cm is preferred. Avoid making passageways that
are too narrow (i.e. along the sides on a house) or your dog may hesitate from
using them.
Tools
To install your E-Fence 3500, you will need a flat-edge spade, Phillips
screwdriver and a wire cutter/stripper. If your layout calls for the wires to be
connected across concrete, you will also need a caulking gun, exterior silicon
caulk and a circular saw with a masonry blade for cutting the pavement.
Boundary Training Flags (50 ea)
21