Hourly Programming Menu; Time Slot - SystemAir TControl POD glass EC Manuel D'installation Et De Maintenance

10 TControl POD glass EC

7.2. HOURLY PROGRAMMING MENU

The description of the various sub-menus is detailed in the following paragraphs.
MENU

Time slot

Time/Date
Alarm
Fan
Configuration
Language
General view of the parameter menu
7.2.1. TIME SLOT
7.2.1.1. OVERVIEW
3 time slots of 4 periods each are available. They can be freely programmed. A selection of days can be
made for each time slot. The start time, setpoint, fan speed and ECO mode can be set for each period.
Time slot
Selection of days
Full week Mo-Su
Working week Mo-Fr
From day to day
A period is active if the start time and days match the programmed values. A period remains active until
the conditions of another period are met. The active setpoint can be overridden by Modbus via the basic
setpoint register (Refer to the § MODBUS TABLES, page 22 - address 255).
A time slot is inactive if:
Time: 00:00 and
²
Fan speed: 0 and
²
Setpoint: 21.0°C and
²
ECO: Off
²
As soon as a value is changed, the time slot is activated.
When a time period is activated, all the parameters (ventilation, temperature setpoint and ECO mode) are
updated.
MENU
Time slot
Time/Date
Alarm
Fan
Configuration
Language
Periods Setting
Start time
Fan speed
1 - 4
Temperature setpoint
ECO mode
Table 1: Time slot structure
"Time slot selection" menu