Navigation; Symbols; Exiting The Parameter Menu - SystemAir TControl POD glass EC Manuel D'installation Et De Maintenance

7.1.3. NAVIGATION

Navigation is performed using the UP, DOWN, LEFT, RIGHT and ENTER buttons. The menus are structured
hierarchically. The highest level is the main menu. From this menu, the user can navigate through different
submenus. From there, access to other submenus is made possible. To return to the previous level,
"header" must be selected and then the LEFT button must be pressed.
The UP, DOWN buttons are used to select the menu line. The selected line will be highlighted. A value can
only be changed on a highlighted line.
Active line
(Highlighted)

7.1.4. SYMBOLS

The following symbols are used in the menu for better guidance when navigating the menu:
7.1.4.1. CHANGE OF VALUE
The value can be changed using the LEFT (-)/RIGHT (+) buttons. No selection via the ENTER
-/+
button is necessary.
7.1.4.2. GO TO THE NEXT MENU
The next menu will be accessed using the RIGHT button.
7.1.4.3. SELECTING THE DISPLAYED VALUE
The symbol is highlighted if the corresponding value is selected. Use ENTER to select parameters
that do not have the symbols

7.1.5. EXITING THE PARAMETER MENU

The parameter menu is exited by selecting the "header" of the main parameter menu window and pressing
the LEFT button. A return to the main menu takes place automatically after 10 minutes of inactivity on the
device.
MENU
Time slot
Time/Date
Alarm
Fan
Configuration
Language
-/+
visible for changing the value.
TControl POD glass EC 9
Header
Next menu