Replacing The Light Bulb; Charcoal Filter - Elica ETP536SS Guide D'utilisation, D'entretien Et D'installation

Replacing the light bulb

Disconnect the hood from the electricity.
Warning! Prior to touching the light bulbs
ensure they are cooled down.
Replace Lights
• Remove the damaged light (twist counter
clockwise) and replace with a new 120
Volt, 50 Watt (maximum) 50° halogen
light made for a GU10 base, suitable for
use in open luminarie.
Some models envisage lateral lamps:
Replace them with identical forms of 40W
(E12) max).
Remove cover to access the lamp housing.
If the lights do not work, make sure that the
lamps are fitted properly into their housings
before you call for technical assistance.

Charcoal Filter

It absorbs unpleasant odours caused by
cooking.
The charcoal filter can be washed once every
two months using hot water and a suitable
detergent, or in a dishwasher at 65°C (if the
dishwasher is used, select the full cycle
function and leave dishes out).
Eliminate excess water without damaging the
filter, then remove the mattress located
inside the plastic frame and put it in the oven
for 10 minutes at 100° C to dry completely.
Replace the mattress every 3 years and
when the cloth is damaged.
20