Elica ETP536SS Guide D'utilisation, D'entretien Et D'installation page 18

Reset and configuration
saturation signal
Switch on hood to any speed (see above
paragraph "Suction speed (power) selection")
Reset grease filter
(FLASHING GREEN LIGHT on control
panel)
First proceed with filter maintenance as
described in corresponding paragraph.
Press and hold down (for more than 3
seconds) the T1 button on the control panel,
the LED light will stop flashing indicating that
the signal reset has been carried out, the
hood will switch off.
Reset coal filter
(FLASHING ORANGE (amber) LED light)
First proceed with filter maintenance as
described in corresponding paragraph.
Press and hold down (for more than 3
seconds) the T1 button on the control panel,
the LED light will stop flashing indicating that
the signal reset has been carried out, the
hood will switch off.
Coal filter saturation signal disactivaction
(for particular applications)
Switch off hood (see above paragraph
"suction speed (power) selection").
Press and hold down (for more than 5
seconds) the T1 button on the control panel,
the LED light will start flashing GREEN
indicating that the coal filter saturation signal
has been disactivated.
In order to reactivate the coal filter saturation
signal, repeat operation, the LED light will
flash ORANGE (amber)
for filter
saturation signal
saturation signal
18