Elica ETP536SS Guide D'utilisation, D'entretien Et D'installation page 12

6. Apply the aesthetic cap to cover the
hood, passing the interconnection
electrical cable inside.
Important: Make sure the
interconnection cable does not touch the
lamps.
7. Fix the hood to the hooking brackets and
secure with 1 screw for each bracket
(COMPULSORY FIXING).
8. Adjust the position of the hood by means
of the adjustment screws.
9. Electrical connection
WARNING
Electrical Shock Hazard
Warning: Turn off power circuit at the
service panel before wiring this unit.
120 VAC, 15 or 20 Amp circuit
required.
ELECTRICAL GROUNDING
INSTRUCTIONS
THIS APPLIANCE IS FITTED WITH AN
ELECTRICAL JUNCTION BOX WITH 3
WIRES, ONE OF WHICH
(GREEN/YELLOW) SERVES TO
GROUND THE APPLIANCE. TO
PROTECT YOU AGAINST ELECTRIC
SHOCK, THE GREEN AND YELLOW
WIRE MUST BE CONNECTED TO THE
GROUNDING WIRE IN YOUR HOME
ELECTRICAL SYSTEM, AND IT MUST
UNDER NO CIRCUMSTANCES BE CUT
OR REMOVED.
Failure to do so can result in death or
electrical shock.
12