Replancing The Light Bulb; Charcoal Filter - Elica FOGLIA Guide D'utilisation, D'entretien Et D'installation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Replacing the light bulb
CAUTION
Before replacing the lamps, switch power off at service panel
and lock service panel disconnecting means to prevent pow-
er from being switched on accidentally.
NOTE: Turn off the lights and fan. Allow the lights to cool
before handling. If new lights do not operate be sure
lights are inserted correctly before calling service.
Replace Lights
Remove the damaged light (twist counter clockwise) and
replace with a new 120 Volt, 50 Watt (maximum) 50°
halogen light made for a GU10 base, suitable for use in
open luminarie.

Charcoal Filter

If the model is not vented to the outside, the air will be recir-
culated through disposable charcoal filters that help remove
smoke and odors.
The charcoal filters cannot be cleaned.
They must be replaced.
Cover the grill that protects the suction motor with the carbon
filter so that the slots on the filter correspond to the pins on
the sides of the motor protection grill.
Turn the carbon filter clockwise to block them (bayonet fix-
ing).
The charcoal filters should be replaced every 4-6 months
(depending on hood usage).
NOTE: DO NOT rinse, or put charcoal filters in an automatic
dishwasher.
NOTE: Charcoal filters are not included with the hood.
They must be ordered from your supplier.
Order the needed kit specifying your hood model and width
size.
A
B
A. Charcoal filter
B. Slots
C.Blower motor
13
C

Publicité

Table des Matières
loading

Table des Matières