Skandika SF-2160 Instructions De Montage Et Mode D'emploi page 21

Step 3
Place the watertank between the rails and fix it with the screws "A".
2 x Screws „C"
4 x Screws „A"
Step 4
Position the footboard between the rails with the top 2 holes aligned with 2 threaded holes in the
tank. Fix the footboard on the rails with the screws "A" and then fix the two stoppers with the
screws "C" as shown. If you experience any problems with aligning the components, slightly lose all
existing connections, align correctly and re-tighten.
4 x Screws „A"
2 x Stopper
21