Publicité
Les langues disponibles
Les langues disponibles
CS.SE.IST-1 / Rev 1.0
Switch-off cycle
The appliance switches off if you press button 4 (ON/OFF) during normal operation. The display will show "FINAL CLEANING". The pellet loading
stops and the flue gas extractor speed increases to maximum and then switches off after the cooling of the appliance, displaying "OFF".
Modifying the main room temperature Setting
-
To modify the room temperature, simply select "SET ROOM" by pressing key 1 (Increase) or key 2 (Decrease).
-
Press keys 1 and 2 (Increase and Decrease) to adjust the value and confirm by pressing key 3 (Set) or 4 (On/Off); values between 07°C and 40°C
can be set.
During this operation, the display will appear as in the following picture:
During the working mode, the appliance enters economy mode operation - "MODULATION" when that temperature value is reached (See "Working
mode").
Modifying the power Setting
-
To modify the working power you must select "SET POWER" by pressing key 5 (Decrease) or key 6 (Increase).
-
Press keys 6 and 5 (Increase and Decrease) to adjust the value and confirm by pressing key 3 (Set) or 4 (On/Off); power values between 1 and 5
can be set.
During this operation, the display will appear as in the following picture:
1
2
3
25°
C
SET TEMP
AMBIENTE
3
SET
POTENZA
15
6
4
5
ENGLISH
Publicité
