Publicité
Les langues disponibles
Les langues disponibles
CS.SE.IST-1 / Rev 1.0
ELECTRICAL CONNECTION
The electric connection must only be performed by qualified staff, in compliance with all general and local safety standards.
Check that the power supply voltage and frequency correspond to 220V – 50 Hz.
The appliance's safety is ensured when it is properly connected to an efficient earthing system.
In the electric connection to the mains power supply, include a 6 A – Id 30 mA differential trip-switch with suitable breaking load. The electric
connections, including the earth connection, must be made after shutting off the electrical system.
When completing the system, bear in mind that the cables must be laid in an unmovable manner and far from parts subject to high temperatures.
During the final wiring of the circuit, only use components with a suitable electrical protection rating. Do not pass electric cables in the immediate
vicinity of the flue gas pipe, unless they are insulated with suitable materials.
KLOVER srl declines all responsibility for injury to persons and animals or damage to objects due to failure to connect the appliance to
earth or to comply with IEC specifications.
THE DISPLAY
The appliance's operating mode is displayed on the console. After turning on the menu, it is possible to choose from many types of display and
available settings according to the selected menu.
The figures below show the display when the appliance is in ON mode.
ROOM TEMPERATURE
1
2
3
1st LED SERIES
1
Set
2
3
CLOCK
17:19
20.0°
P-3
C
WORK
DIALOGUE
2nd LED SERIES
9
OPERATING POWER
6
4
5
6
4
5
ENGLISH
Publicité
