klover DEA ECO 6 Instructions D'utilisation page 36

CS.SE.IST-1 / Rev 1.0
MENU LEVEL
02 – 03 – 29
02 – 03 – 30
02 – 03 – 31
02 – 03 – 32
02 – 03 – 33
02 – 03 – 34
02 – 03 – 35
02 – 03 – 36
02 – 03 – 37
Sub-menu 02 – 04 – week-end program
Enables/disables/sets the programmable timer's weekend functions (Saturday and Sunday).
MENU LEVEL
02 – 04 – 01
02 – 04 – 02
02 – 04 – 03
02 – 04 – 04
02 – 04 – 05
TIP: in order to avoid confusion and any undesired switching on/off operations, only activate a single programme at a time (daily, weekly or
weekend programme).
Deactivate the daily program if you wish to use the weekly program instead. If you use the weekly program in programs 1, 2, 3 and 4, always
keep the week-end program disabled.
Only enable week-end programming after disabling the weekly program.
MENU 03 – CHOOSE LANGUAGE
Allows you to select the dialogue language from the available choices (Italian, English, French, German, Spanish and Dutch).
MENU 04 – STAND-BY
If OFF, the switching off of the appliance once the "SET ROOM" temperature setting has been reached is excluded. The operating power will however
be modulated; the display will show the word "MODULATION"
If ON, the appliance will enter modulation mode and/or switch off if the temperature set in "SET ROOM" is reached. During the modulation stage the
display will show the words "OK ST-BY"; when switched off it will show "STAND-BY".
MENU 05 – ACOUSTIC ALARM
Allows you to enable or disable the acoustic signal in the event of an alarm.
MENU 06 – INITIAL LOAD
Enables pellet pre-loading for 90" when the appliance is switched off and cooled down. Start the function with button 1 and stop with button 4. This
may be useful if the appliance is switched on after the tank has been completely emptied, or when it is filled for the first time. Warning: once the
operation has been completed, before switching on the appliance you should empty the accumulation of pellets deposited inside the brazier.
MENU 07 – FIREPLACE STATUS
It allows for viewing the instantaneous state of the appliance, by showing the state of the various devices connected to it. Several pages are displayed
in succession. The data is reserved for Technical assistance Centre.
MENU 08 – TECHNICAL CALIBRATION
Allows you to access all data reserved for the Technical Assistance Centre. Access is protected by a password. Unauthorised access can cause
serious damage to the equipment, to things and the environment as well as personal injuries.
SELECTION
START PROG 4
STOP PROG 4
MONDAY PROG 4
TUESDAY PROG 4
WEDNESDAY PROG 4
THURSDAY PROG 4
FRIDAY PROG 4
SATURDAY PROG 4
SUNDAY PROG 4
SELECTION
CHRONO WEEK-END
START 1st WEEKEND
STOP 1st WEEKEND
START 2nd WEEKEND
STOP 2nd WEEKEND
PROGRAMME 4
MEANING
Turn-on time of the fourth programme
Turn-off time of the fourth programme
Reference days of the fourth programme
MEANING
Enable/disable the weekend programme
Turn-on time of the first programme
Turn-off time of the first programme
Turn-on time of the second programme
Turn-off time of the second programme
13
ENGLISH
POSSIBLE VALUES
Time – OFF
Time – OFF
On/off
On/off
On/off
On/off
On/off
On/off
On/off
POSSIBLE VALUES
ON – OFF
Time – OFF
Time – OFF
Time – OFF
Time – OFF