Grundfos SE Serie Notice page 22

• Machinery Directive (2006/42/EC).
Standard used: EN 809:1998 + A1:2009.
• EMC Directive (2014/30/EU)
Standard used: EN 61326-1:2013.
• RoHS Directives (2011/65/EU and 2015/863/EU).
Standard used: EN IEC 63000:2018
• ATEX Directive (2014/34/EU). Applies only to products intended for use in potentially explosive
environments, Ex II 2G. The Ex classification is given on the upper part of the nameplate and in EU-type
examination certificate. Further information, see below.
Certificate No: FM14ATEX0002X.
Standards used: EN IEC 60079-0:2018, EN 60079-1:2014, EN 60529:1991+A1:2000+A2:2013, EN
60079-11:2012
Based on self-assessment: EN ISO 80079-36:2016, EN ISO 80079-37:2016
Non-electrical self-declaration made by Grundfos according to the above listed standards is retained by FM
Approvals Europe Ltd., No 2809, Dublin, Ireland
Notified body for EU – Type Certificate: FM Approvals Europe Ltd., No 2809, Dublin, Ireland
Notified body for production: DEKRA Certification B.V., No. 0344, Meaner 1051, 6825 MJ Arnhem, The
Netherlands
Manufacturer: Grundfos Holding A/S, Poul Due Jensens Vej 7, DK-8850 Bjerringbro, Denmark
This EU declaration of conformity is only valid when published as part of the Grundfos safety instructions
(publication number 99230405).
Székesfehérvár, 04/09/2023
Person authorised to compile technical file and empowered to sign the EU declaration of conformity.
22
Zoltán Lajtos
MUNI Solutions Value Stream Director
Grundfos Holding A/S
Poul Due Jensens Vej 7
8850 Bjerringbro, Denmark
www.grundfos.com