Quickie R-Net Manuel D'utilisation page 17

.
Indoor-Drive
Fig.4.26
Fig.4.27
Fig.4.28
Indoor-Drive
Fig.4.29
R-Net Control System | Rev. H | English
4.4 Locking the Joystick Module (Fig 4.26 - 4.29)
To lock the wheelchair:
• While the control system is switched on, (Fig 4.26) depress
and hold the On/Off button.
• After 1 second the control system will beep & the screen will
go blank, (Fig 4.27). Now release the On/Off button
• Deflect the joystick forwards until the control system beeps.
• Deflect the joystick in reverse until the control system beeps.
• Release the joystick, there will be a long beep.
• The wheelchair is now locked.
• The following icon will be displayed, (Fig 4.28), the next time
the Control System is switched on.
• If an LED Joystick Module is fitted the Speed Indicator LEDs
will ripple from left to right.
• To unlock the wheelchair:
• If the control system has switched off, press the On/Off
button. The "Locked " symbol is displayed, (Fig 4.28).
• Deflect the joystick forwards until the control system beeps.
• Deflect the joystick in reverse until the control system beeps.
• Release the joystick. There will be a long beep & the screen
will illuminate, (Fig 4.29).
• The wheelchair is now unlocked.
17