SilverCrest SMS 300 B2 Mode D'emploi Et Consignes De Sécurité page 11

Safety switches
The appliance has two safety switches
of the appliance. The UV-C lamp
is pressed if both safety switches
the automatic switch-off of the UV-C lamp
the switched-on appliance is placed on a level surface (fig. A).
A
If the safety switches lose contact with the substrate, the automatic switch-off
function is activated and the UV-C lamp
B
Operation
WARNING! RISK OF INJURY!
► Never look into the UV-C lamp
► Never use the appliance on people or animals! UV radiation can lead to
injuries to eyes and skin.
► Only operate the appliance when it has been properly assembled.
This is the only way to avoid the dangers of UV radiation.
► Use this appliance only as described in these operating instructions.
This is the only way to avoid the dangers of UV radiation.
NOTE
► Use the appliance only if it is completely and correctly assembled. The dust
container
undamaged. If dirt gets into the motor of the unit, it could cause motor damage.
► Make sure that the safety switches of the UV-C lamp
of the appliance are not blocked.
► Test the appliance on a small, unobtrusive spot first.
■ 8 │ GB │ IE
8
0
UV-C lamp on
UV-C lamp off
3
and the HEPA dust filter
0
on the left and right of the underside
only switches on when the vibration button
are pressed simultaneously. This deactivates
8
. This happens automatically when
8
stops lighting (figs. B and C).
C
UV-C lamp off
8
during use!
4
must be inserted correctly and
8
w
on the underside
SMS 300 B2