Medion LIFE E64088 Notice D'utilisation page 142

17. Troubleshooting
If a fault occurs, first see whether you can resolve the problem yourself. You might find this
overview useful.
Fault
No function
No sound
CD is not played.
Timer does not
switch on
CAUTION!
Risk of injury!
Opening the device can cause injuries.
Never attempt to repair the device yourself. If a repair is necessary, please contact our
Service Centre or a suitable authorised repair workshop.
142
Possible cause
The device is disrupted by a
thunderstorm, static charge
or another external factor.
The current volume is set
too low.
The mute setting is acti-
vated.
When the device is con-
nected via AUX IN or Blue-
tooth: The volume of the
external device is too low.
Condensation has formed.
Incorrect CD format.
The CD is dirty or incorrect-
ly inserted.
The timer is not set cor-
rectly.
Corrective action
Pull the mains plug out of the socket
and then plug it in again.
Increase the volume.
Switch off the mute setting.
Increase the volume on the external
device.
Pull the mains plug out of the socket
and wait until the device and the CD
has adapted to the environmental
conditions.
The device only supports the CD for-
mats specified in the technical specifi-
cations.
Clean the CD and insert it into the CD
compartment with the label facing
upwards.
Check whether the correct alarm time
has been set.
Check whether the alarm has been
activated.