Medion LIFE E64088 Notice D'utilisation page 141

13.8.3. Control
You can control how tracks are played, the
volume and a range of special functions on
your external device and on the micro au-
dio system. What functions are available is
dependent on your external device and the
software that you use. In principle, these but-
tons on the device are intended for control
via Bluetooth:
• VOL-/+: Reduce/increase volume
• : Start/pause playback
• or : Previous / next track
14. Connecting an exter-
nal playback device
You can use the AUX IN jack to connect an
external playback device (for example a CD
player or MP3 player).
Switch the micro audio system to stand-
by mode.
Switch off your external device.
Plug the end of a 3.5 mm jack cable (not
supplied in the package contents) into
the AUX IN jack on the front of the micro
audio system.
Connect the other end of the cable to
your external device.
Switch on your external device and, if
necessary, the micro audio system.
Press the button once or several times
until you see AUX on the display. The au-
dio signal from your external device will
now be played back.
15. Cleaning
• Before cleaning, pull the plug out of the
socket. Clean the external surfaces of the
device with a soft, dry cloth. Avoid the
use of chemical solutions and cleaning
products because these may damage the
device surface and/or the labels on it.
• Never allow liquids to get inside the de-
vice. Always keep the cover closed except
when placing or removing a record, etc.
16. End of operation
If you do not need to use the device for a
relatively long time, please take it out of op-
eration.
To do this, unplug the mains cable and take
out the batteries.
The device also switches off after 15 minutes
of inactivity. You can switch it back on again
by pressing the button.
The device continues using electricity, even
when it is switched off. Unplug the device
from the power socket to switch if off com-
pletely.
DE
FR
NL
ES
IT
EN
141