(30) Parallel guide with circle cutter
a)
(31) Circle cutter centring tip
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Jigsaw
Article number
Stroke rate control
Pendulum action
Rated voltage
No-load stroke rate n₀
Stroke
Max. cutting depth
– in wood
– in aluminium
– in steel (unalloyed)
Max. cutting angle (left/right)
Weight according to EPTA-Pro-
A)
cedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
B)
during operation
and during
storage
Recommended rechargeable
batteries
Recommended battery char-
C)
gers
A) Depends on battery in use
B) Limited performance at temperatures < 0 °C
C) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
Noise/Vibration Information
Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 85 dB(A); sound power level
93 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a
(triax vector sum) and uncertainty K
h
determined according to EN 62841‑2‑11:
Cutting boards with saw blade T 144 D:
2
2
a
= 11 m/s
, K = 1.5 m/s
,
h,B
cutting sheet metal with saw blade T 118 A:
2
2
a
= 8.5 m/s
, K = 1.5 m/s
.
h,M
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
Bosch Power Tools
a)
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ac-
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
crease the vibration and noise emissions over the total work-
AdvancedSaw 18V‑140
ing period.
3 603 K13 0..
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
●
not actually being used should also be taken into account.
●
This may significantly reduce vibration and noise emissions
V=
18
over the total working period.
–1
min
0–3000
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
mm
23
power tool and accessories, keeping their hands warm, and
organising workflows correctly.
mm
140
mm
20
Rechargeable battery
mm
10
Bosch sells some cordless power tools without a re-
°
45
chargeable battery. You can tell whether a rechargeable bat-
kg
1.9 (1.5 Ah) to
tery is included with the power tool by looking at the pack-
2.2 (6.0 Ah)
aging.
°C
0 ... +35
Charging the battery
u
°C
–20 ... +50
Note: Lithium-ion rechargeable batteries are supplied par-
PBA 18V...W-.
tially charged according to international transport regula-
tions. To ensure full rechargeable battery capacity, fully
AL 18...
charge the rechargeable battery before using your tool for
the first time.
Inserting the Battery
Push the charged battery into the battery holder until it
clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery re-
lease button and pull the battery out. Do not use force to do
this.
Battery Charge Indicator on the Power Tool
The battery charge indicator on the power tool indicates the
state of charge of the battery or an overload when the power
tool is switched on.
LED
3 × continuous green light
2 × continuous green light
1 × continuous green light
1 × slowly flashing green light
The three LEDs in the battery charge indicator on the power
tool flash quickly when the temperature of the rechargeable
Use only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
1 609 92A 8M8 | (18.08.2023)
English | 17
State of charge
≈ 75–100 %
≈ 40–75 %
≈ 15–40 %
≈ 0–15 %