Elica NIKOLATESLA FIT 3Z Prescriptions De Montage Et Mode D'emploi page 18

Pot Detector
Temperature Manager Function active
Pause function
Automatic Heat UP function
CHARACTERISTICS OF THE HOB
● Safe Activation
The product is activated only in the presence of pots on the
cooking zone: the heating process does not start or is
interrupted if there are no pots, or if these are removed.
● Pot Detector
The product automatically detects the presence of pots on
the cooking zones.
● Safety Shut Down
For safety reasons, each cooking zone has a maximum
operating time, which depends on the power level set.
● Residual Heat Indicator
When switching off one or more cooking zones, the
residual heat is indicated with a specific visual signal on the
display of the corresponding zone by the symbol
USING THE HOB
Note: Before activating any functions, the desired zone
must be activated
● Power-on
Briefly press (touch)
the symbol lights up; If you continue to press: all the
available functions will become visible for a few seconds,
after which only the main ones will remain active; the other
ones can be used, and will be activated, later, while using
the device.
all the available functions will be
IMPORTANT:
illuminated with light intensity, which will become
more intense only when they are activated.
Press again to turn off
Note: This function has priority over the others.
● Selecting the cooking zones
Briefly press (touch) the Selection/Display (2) area
corresponding to the desired cooking zone.
● Power Level
The hob features 9 power levels. Touch and slide your
fingers along the Selection bar (3):
to the right to increase the power level;
to the left to decrease the power level.
The power level set will be displayed in the Selection/
Display area (2)
● Power Booster
.
ON/OFF (1) hob / extractor fan:
The product features a supplementary power level (after
level ), which remains active for 5 minutes, after which
the temperature returns to the previously set value.
Touch and slide your fingers along the Selection bar (3)
(beyond level ) and activate the Power Booster. The
Power Booster level is indicated in the Selection / Display
area (2) with the symbol
● Cooking Zone Timer
The Cooking Zone Timer function is a countdown that can
be set, even simultaneously, on each cooking zone. At the
end of the period set, the cooking zones switch off
automatically and the user is notified with a dedicated
acoustic signal.
Activation of the cooking zone timer function
• Touch (press) the Selection/Display area (2) (power
level other than zero)
• Press (6) relating to the cooking zone
• Use the symbols
Timer, which is shown in the Zone/Display (4); while
setting, the symbol
Note: wait 10 seconds without pressing any other
command, so that the Cooking Zone Timer will start.
Note: by pressing and holding
zone Timer is reset.
If desired, repeat the operation for several cooking
zones:
Each cooking zone can have a different Timer set; in the
display (4) the countdown of the cooking zone selected at
that moment will appear; if no zone is selected, press the
Display (4) to view the STAND-ALONE Timer countdown.
When the timer has finished the countdown, an acoustic
signal sounds and the cooking zone switches off.
To switch off the Timer:
• select the cooking zone (2)
• set the duration of the Timer to
(5).
The countdown display mode is the same as for the
STAND-ALONE Timer.
● Power Limitation
The Power Limitation function allows the product to be
used while limiting its maximum absorption, adjusting the
absorbed power in all active cooking zones, ensuring that
the total absorbed power of the hob does not exceed the
set maximum absorption level.
Note: the setting must be made with the hob switched off,
without pressing the
is connected to the mains, or reconnected to the mains,
18
.
(5) to set the duration of the
(6) flashes.
(6) again, the cooking
ON/OFF (1) button, when the hob
, using