Elica NIKOLATESLA FIT 3Z Prescriptions De Montage Et Mode D'emploi page 17

3. OPERATION
CONTROL PANEL
T. Function
1 ON/OFF of the hob / hob extractor fan
Selection of the cooking zones / Cooking zone dis-
2
play
Increase/decrease cooking power level and extrac-
3
tion speed (power)
Display the cooking power level and extraction
speed (power)
4 Activate "STAND ALONE" timer
Display : "STAND ALONE" timer / Cooking Zones
Timer.
Increase/Decrease "STAND ALONE" Timer time /
5
Cooking Zones timer
6 Activation of Cooking Zones Timer
Indicator of Cooking Zones Timer active
7 Automatic Heat Up Activation.
Temperature Manager activation (Warming Func-
8
tion)
9 Pause
10 Key Lock
11 Indicator Extractor active
Activation of Filter Saturation Indicator
12 Extractor Selection/Activation
Extractor Display
Display of Carbon/ceramic filter - Grease filter satur-
ation
13 Reset Filter Saturation
14 Activation of extractor automatic function
THINGS TO KNOW BEFORE STARTING
All functions of this hob are designed to comply with the
most stringent safety regulations. For this reason:
• Some functions will not be activated, or will be
automatically deactivated, in the absence of pots on
the burners or when they are poorly positioned.
• In other cases the activated functions will be automatically
deactivated after a few seconds, if the specific function
requires a further setting that has not been selected (e.g.:
"Turning the hob on" without "Selecting the cooking zone"
and the "Operating temperature", or the "Lock Function" or
the "Timer" function).
Wait for the display to turn off before approaching the
cooking zone.
Please note! In the case (for example) of prolonged use,
the cooking zone may not immediately shut down because
it is in the cooling phase; the symbol
cooking zone display to indicate that this phase is under
way. Wait for the display to turn off before approaching the
cooking zone.
COOKING ZONE DISPLAY
The following is shown on the cooking zone displays:
Function
Cooking zone on
Power Level
Residual Heat Indicator
17
will appear on the
Value