Travel Hair-Dryer - SEVERIN HT 0156 Mode D'emploi

GB

Travel hair-dryer

Dear Customer,
Before using the appliance, read the
following instructions carefully and keep
this manual for future reference. The
appliance must only be used by persons
familiar with these instructions.
Connection to the mains supply
∙ The hair dryer should only be connected
to an earthed socket installed in
accordance with the regulations.
Voltage selector:
∙ The appliance is equipped with a
voltage selector which can be set to the
local supply voltage. Turn the selector
to the required voltage using a coin or
other suitable object.
∙ T he 115 V selector position covers the
110-120 V range, and the 230 V position
the 220-240 V range.
CE marking
This product complies with all binding CE
labelling directives.
Familiarisation
1. Air intake opening
2. Slide switch
3. Voltage selector (rear of the grip)
4. Power-cord anti-kink protection with
hanging loop
5. Foldable grip
6. Styling nozzle
7. Air outlet opening
8. Travel pouch (not shown)
Important safety instructions
∙ In order to avoid hazards,
repairs to this electrical
appliance or its power
cord must be carried out
by our customer service.
If repairs are needed,
please send the appliance
to our customer service
department (see appendix).
∙ Before cleaning the
appliance, ensure it is
disconnected from the
power supply and has
cooled down completely.
∙ To avoid any risk of electric
shock, do not clean the
appliance with liquids or
immerse it in a liquid.
∙ Do not leave the appliance
without supervision while it
is connected to the mains.
∙ Caution: Danger of
burns. Keep the appliance
away from small children
particularly during use and
9