ISE SY-T2710 Manuel D'instructions page 15

Step 2: Fix the screws of upright columns
Take 2pcs M8*45 screws and C8 washers, fix
the right and left armrest to the base with
allen wrench, tighten screw B as shown.
B
C
Attention: Tighten all the screws and connect power before making sure all the above
steps are finished. Read the following instructions carefully first before using.
Congratulations! You finish assembling.
Put the safety key on the yellow parts, connect power to run!
To save space when the treadmill is not in
use, Lift the machine up lightly till you hear a
"click" sound.
B
C
FOLDING STEPS
D
B
A
C
B
D
Step 3: Display Assembly
Fix the display to the upright columns
with 2pcs screws(B) and 2pcs wash-
ers(C)
When you are going to use, Kick the cylinder
to flat the running board.
3
A
C
EN