Panasonic FZ-A3 Serie Instructions D'utilisation page 5

Clean dust and other debris on the AC plug regularly.
If dust or other debris accumulates on the plug, humidity,
etc. may cause a defect in the insulation, which may result
in a fire.
• Pull the plug, and wipe it with a dry cloth.
• Pull the plug if the product is not being used for a long
period of time.
Insert the AC plug completely.
If the plug is not inserted completely, fire due to overheating
or electric shock may result.
• Do not use a damaged plug or loose AC outlet.
Do not pull or insert the AC plug if your hands are wet.
Electric shock may result.
Do not connect the AC adaptor to a power source other
than a standard household AC outlet.
Otherwise, a fire due to overheating may result.
Connecting to a DC/AC converter (inverter) may damage
the AC adaptor. On an airplane, only connect the AC
adaptor/charger to an AC outlet specifically approved for
such use.
Do not use the product near electronic devices that are
used for high-precision control or weak signals.
RF signals generated by the product may interfere with such
electronic devices and result in an accident due to
malfunction.
• Examples of electronic devices to be aware of:
Hearing aids, implantable cardiac pacemakers and
implantable cardioverter defibrillators, other medical
devices, fire alarms, automatic doors, and other automatic
control devices. For those who use implantable cardiac
pacemakers, implantable cardioverter defibrillators, or
other medical devices, confirm the effects of RF signals
with the relevant medical device manufacturer or
distributor.
CAUTION
Do not leave the product in areas with a high
concentration of moisture, steam, dust, oily vapors, etc.
for extended periods.
This may result in a fire or electric shock.
Do not use the AC adaptor in areas with a high
concentration of moisture, steam, dust, oily vapors, etc.
This may result in a fire or electric shock.
Do not move the product while the AC plug is
connected.
The AC cord may be damaged, resulting in a fire or electric
shock.
• If the AC cord is damaged, unplug the AC plug
immediately, and then contact your technical support
representative.
Do not subject the AC adaptor to any strong impact.
Using the AC adaptor after a strong impact such as being
dropped may result in a fire or electric shock.
• Contact your technical support representative if any
malfunction occurs.
Make sure not to charge the product when it is wet.
This may result in a fire or electric shock.
Do not leave the product in extremely high temperature
environments for an extended period.
Leaving the product where it will be exposed to extremely
high temperatures, such as near fire or in direct sunlight,
may deform the product or cause damage or malfunction to
its internal components. Using the product in these
conditions may cause short circuit, insulation defects, etc.,
which may in turn cause a fire or electric shock.
Safety Precautions (English) 5