Problem
The "Needs refill"
message does not
disappear after refilling
the detergent/softener.
Detergent/softener is not
dispensed.
Excessive or insufficient
amount of detergent/
softener is dispensed.
Screen retention occurs
while using the LCD
screen.
If a problem persists, contact a service center. The number of the service center is on the label attached to
the product.
Untitled-15 83
Untitled-15 83
• After refilling the Auto dispenser and Flex auto dispenser, close the
detergent drawer, and then tap and hold
will start to detect the detergent/softener, and the message will
disappear.
• Depending on the type of detergent/softener, the message may not
disappear immediately.
• Check if the Amount option for Auto dispenser or Flex auto dispenser
is set to Off. The automatic dispensers do not dispense the detergent if
the option is set to Off.
• Tap
, select Auto dispenser or Flex auto dispenser, and then change
the Amount option.
• The automatic dispensers are disabled in the Delicates, Activewear, or
Wool cycles. To dispense detergent in those cycles, tap
dispenser or Flex auto dispenser, and then change the Amount option.
• Check the Amount option for Auto dispenser or Flex auto dispenser.
Tap
, select Auto dispenser or Flex auto dispenser, and then change
the Amount option.
• When the temperature around the Laundry Combo is low, screen
retention may occur while using the LCD. It will function normally when
the temperature rises.
Action
. Then, the Laundry Combo
, select Auto
English 83
2024-07-11
2024-07-11
3:47:50
3:47:50