Publicité
Les langues disponibles
Les langues disponibles
Options
Pump clean
Auto Open Door
AI pattern
My cycles
Untitled-15 57
Untitled-15 57
Descriptions
You can use this function to clean detergent or softener residue buildup
in the pump.
Use this function after you empty and clean the dispenser.
• You can select from Auto dispenser, Flex auto dispenser, or Auto
dispenser/Flex auto dispenser.
-
Pour water up to the MAX line in the dispenser, and then tap Start
cleaning.
NOTE
During the pump cleaning process, the drum rotates to drain water.
When the pump cleaning process is complete, the water inside the
dispenser(s) will drain automatically.
You can set the Laundry Combo door to open automatically after the
cycle is finished.
• The default setting is Open immediately. However, if you perform
only the washing process, the Open 5 mins later setting applies.
• You can select from Open 5 mins later, or Open immediately.
NOTE
• Available options for the Auto Open Door function are active only
when the function is on. The options are inactive when the function
is off.
• The Auto Open Door function does not work when Lock is enabled.
• The door will not open at the end of the cycle if you have enabled the
Stay Connect function in the SmartThings app.
This function saves frequently used cycles and settings. When you turn
the function on, the Laundry Combo remembers the cycles you use
most and their settings (Wash cycles: Temp., Spin, and Soil / Dry cycles:
Dryness and Dry Time) and displays them in frequency order.
• The default setting is On. Set it to Off if you do not want to use this
function.
• When you turn off the function, all the saved data resets.
Add or remove cycles to create a personal cycle list.
• You can only edit a cycle to create a personal cycle when the Laundry
Combo is not operating.
NOTE
• The Normal and Product Care cycle cannot be removed from the list
of cycles.
• You can also edit My cycles in the SmartThings app.
English 57
2024-07-11
2024-07-11
3:47:45
3:47:45
Publicité
